#1 Rated Contractors! We Serve Nashville and all of Tennessee!
   
Home Insurance Claims About Us Contact Us
 
 
 
Blog

Posts Tagged ‘roofers in nashville tn’

Fixing Common Gutter Troubles

Posted on: September 10th, 2012 by Admin

Gutters are important in a house’s roofing system because they mainly function to keep rain water away from the roof surface and the house’s foundation. Without gutters, rain waters dripping from the roof surface can spill all over the place which could cause water damage to the house’s exterior and foundation. If you are having some troubles with your gutters, roofers in Nashville are the right people to contact for help. However, let’s see first if you can fix some of them yourself.

Clogged Gutters. Leaves and other debris that collect in uncovered gutters are the common culprits for clogged gutters. If you don’t clean your gutters regularly, your gutters would really get clogged because of too much leaves and debris that are in it already. A modern and effective solution for this is gutter guards or gutter protection. These are materials used to prevent leaves and other debris from falling straight into the gutter. Their function is much like that of filters, allowing only water to proceed to the gutters. Moreover, to make sure that your gutters won’t clog anymore, clean the gutter guards and the gutters regularly.

Leaking Gutters. You may be wondering why your gutters fail in channeling water when you are certain that they are properly installed and not sagging. The reason could be that there are holes in your gutters. To check for holes, run down water through the gutter by using a garden hose and observe where the water exits along the gutter. You can caulk these holes or put sealants on them, but if they are too many, have new ones installed already.

Rusty Gutters. Galvanized metal is one of the common gutter materials used probably because they are the most affordable. However, metal gutter are susceptible to rust and they will indeed corrode as they deteriorate. But you can delay this process and prolong the life of your metal gutters by heavily applying elastic roofing cement, asphalt-based compound, or smokestack paint on them to prevent corrosion.

Retired Gutters. Gutters deteriorate over time and as they near the end of their life spans, the problems and damages get more severe and unrepairable by simple repairs. In such cases, call up roofers in Nashville to get some advice about what better gutter material you should now install. Make sure that you choose a better material this time so it will last longer. You can also ask roofers to install the new gutters for you and make sure that they will be properly installed.


Proactive Roof Leak Prevention

Posted on: August 29th, 2012 by Admin

You have a leaky roof if you can see water marks on your ceilings or walls. However, you don’t have to wait for water marks to appear and for the rain to find out that your roof is leaking. You should hold regular check-up and maintenance on your roof to proactively prevent damages and roof problems like roof leaks to get worse.

To find out if you have a leaking roof, run down water on the roof surface by using a garden hose. While doing this, have an assistant watch the ceilings in your house for dripping water. Roofs leak when there are tiny openings on the roof surface that allow water to seep into the roof system. The most common culprits of roof leaks are nail holes, improperly installed flashings, roof penetrations, dormers, skylights, and anything that could allow small gaps on the roof surface. That is why, you need to regularly check up on your roof.

You can repair roof leaks on your own by employing quick solutions like caulk, sealants, and cement which seal or patch up the gaps or openings that are allowing rain water to seep through. If any of the flashings (chimneys, valleys, roof vents, etc.) are causing leaks, you can fasten them again into their proper place or replace them if they are already damaged. In some cases, shingles are also damaged and need to be replaced. You can use a sheet of galvanized metal to temporarily serve as the shingle replacement.

When fixing roof leaks on your own, observe safety precautions and prioritize your safety. Never climb up your roof when the surface is wet, when it is still raining, or when the wind is high. Wait for the roof surface to get completely dry before climbing up. Also, always wear a harness while you work up on your roof to avoid free falling.

Sometimes, roof leaks get complicated and quick fixes may not work. In such cases, you will be needing help from roofers in Nashville, TN. You need professional help from roofers in Nashville, TN when there are too many leaks or the leaks have already caused big damages or you have a ceramic tile roof which is difficult to repair. When hiring a roofer to fix the leaks and the damages for you, make sure to choose a legitimate and experienced one.

Roof leaks can cause your underlayment, roof frame, sidings, and insulation to rot. They stain your ceiling and walls, making them ugly and untidy. Leaks can also cause mold growth. You can avoid these consequences if you take proactive steps now to prevent or stop roof leaks. Proactively preventing roof leaks saves you money, time, and effort.


Did You Know That Gutters Need Protection Too?

Posted on: August 22nd, 2012 by Admin

Gutters, sometimes referred to as rain gutters, work hand in hand with downspouts to ensure proper drainage system for your roof system. They basically collect rain water running down from the roof surface and channel it to the downspout which allows it to flow outside the house.

Gutters deteriorate and get damaged over time. Some of the common gutter problems are sagging, clogging, and cracking. Gutters sag when heavy snow collects on them and is not immediately removed. Sagging can also be caused by loose or missing fasteners. Meanwhile, leaves, asphalt shingle granules, and other debris clog gutters and even downspouts if they are not cleaned in a regular basis. Lastly, vinyl gutters can get so brittle in a dry climate which makes them vulnerable to cracks. Gutters with cracks cannot obviously serve its purpose well.

Homeowners tend to call up Nashville, TN roofers to fix problematic gutters. However, an innovative and effective solution to simple gutter problems is now available: gutter guards. Gutter guards have one basic function that is, to prevent debris from collecting in the gutters which can cause them to clog and not function well. There are several kinds of gutter guards from which you can choose. Some of them are enumerated below.

Mesh or Screens. These gutter guards prevent big debris from falling straight into the gutters which could eventually clog them. However, since they still have tiny holes which allow rain water to flow through, tiny debris could also still get in and can still cause clogging. Mesh or screen gutter guards are one of the least expensive types of gutter guards. More advanced models of this gutter guard type claim to protect your gutters even from the finest debris.

Reverse Curve. This type of gutter guard is usually made from vinyl. It channels water via its nose-like curve in its front so that only the water goes straight into the gutters, leaving out the leaves and other debris. However, like mesh guards, reverse curve can still allow small debris into the gutter as they can still flow with the water coming into the gutters.

Brush. Unlike other gutter guards, brush guards do not act as filters but barriers. They consist of stiff bristles and are inserted into the gutter from one end to the other. They block large debris from coming into the gutters while trap small debris in the bristles. Brush guards need to be removed regularly to shake off debris and dirt from them.

Although Nashville, TN roofers are a big help most of the time, you don’t have to keep on coming back for your problematic gutters. Gutter guards can protect and surely prolong the life of your gutters.


Choosing Gutter Materials

Posted on: August 13th, 2012 by Admin

Gutters and downspouts are essentially the ones that make up your roof’s drainage system. They are important in your overall roofing system; that is why, it is just right to be meticulous in choosing the right material for your gutters. You can choose from the following options:

Aluminum. Aluminum gutters are lightweight and that is why, its most obvious disadvantage is that it can be easily bent out of shape by impact. For example, a ladder leaning against aluminum gutters can cause dents to the gutters. The good thing about its being lightweight, is it’s easy to install. It is also resistant to corrosion. Aluminum gutters usually come pre-painted in white but are also available in several colors. For a stronger aluminum gutter, choose the one with 0.032 gauge. It can strongly hold ice and snow and would not easily give way.

Copper. Copper is the most stylish or decorative material for rain gutters. This is one of the reasons why it is the most expensive gutter material. Copper changes its color to brown, blue, or green patina over time, giving the roof a more elegant look. Copper gutters are more durable than aluminum gutters but they are not resistant to corrosion. The price of copper gutters change as the value of copper in the market fluctuates. If you are choosing copper gutters, have professional roofers Nashville, TN install them for you. Installing them yourself is not advisable.

Galvanized Steel. Galvanized steel gutters are coated with zinc. They are the strongest—not easily deformed by ice, snow, impact, or debris. Steel gutters are also cost-effective. However, they often come unpainted, not making your roof any more stylish. It is not wise to paint them, though, because paint does not adhere well on the material. Like copper gutters, steel gutters are not resistant to corrosion.

Vinyl. Vinyl, also called PVC and plastic, is becoming popular now in American homes and is rated the cheapest gutter material. It comes in several colors just like with vinyl windows and sidings. Since it’s plastic, vinyl does not corrode. It is also flexible and resilient. However, during cold weather, vinyl becomes brittle, making it easier to crack.

You can ask professional roofers Nashville, TN about the most appropriate and cost-effective material for your gutters and downspouts. If you are concerned about the maintenance needed for a gutter material, it really doesn’t matter because you must regularly inspect and maintain your gutters and downspouts to prolong their life and keep them functioning well. Don’t hesitate to ask an expert roofer for advice.


Getting Up Close and Personal with Vinyl Sidings

Posted on: August 10th, 2012 by Admin

Vinyl is the most preferred siding material in the United States. According to 2012 U.S. Census Bureau study, vinyl siding remained the top choice for exterior cladding on new single-family houses for almost 17 years now. Even without the figures, it can be observed that most American homes today are clad with vinyl sidings. However, not many homeowners are aware of the important facts about vinyl sidings.

Unfriendly to the Environment

Vinyl sidings are made of polyvinyl chloride or PVC plastic resin. This component has been controversial as green building advocates say that PVC is the worst plastic to hurt the environment as well as people’s health. They say that in the process of manufacturing PVC, a certain carcinogen called dioxin is produced. Moreover, vinyl releases toxic gases when it burns—either accidentally or in a landfill—releasing more dioxins. In addition, since vinyl sidings are plastic, they are recyclable. However, a lot of additives are needed for them to be used again thus, almost no one is willing to recycle vinyl sidings. Studies show that only one percent of the vinyl sidings disposed gets recycled. The rest is burned.

Maintenance-free is a Joke

Vinyl sidings became popular in the 50s but its reputation declined when it was discovered to be vulnerable to cracks. Actually, vinyl is resilient to impact. However, during cold weather, the material gets brittle and can be easily cracked or broken. Moreover, vinyl sidings deteriorate due to temperature, extreme weather conditions, and age. They get damaged by too much moisture, strong wind, hail, and by its own expansion and contraction when improperly installed. Also, though vinyl sidings are available in several colors, the color usually fades after 5 years.

That only means that ads saying that vinyl sidings are “maintenance-free” are lies. Vinyl sidings still need to be washed at least once a year and repainted when their color has faded. If there are damages, patching them up would not work; broken panels should be replaced instead. Vinyl sidings also need regular inspection and caulking to avoid moisture from getting trapped under the boards.

Energy Efficiency…A Joke Too?

Most vinyl siding manufacturers boast about their products as being energy-efficient. Well, they really have to be because sidings are supposed to protect houses and not just decorate them. However, many homeowners and home building experts have observed that vinyl sidings do not really do much in reducing a household’s energy costs, even if there is a lot of foam insulation. Moreover, vinyl sidings have the tendency to trap water vapor underneath them. This would result in mold growth, rot, and inner paint deterioration. Exterior cladding are supposed to do otherwise.

As a final note, ask professional roofers Nashville, TN about the color, material, price, manufacturer, and design of sidings appropriate for your house. Do not let unprofessional and inexperienced roofers Nashville, TN install sidings for you; it would only be consequential to more problems.


Things to Look Out For in Your House Exteriors

Posted on: August 7th, 2012 by Admin

Even if you are not planning to sell your house, enhancing the exteriors is a must. By doing this, you can make your house look beautiful while avoiding having serious damage. Fortunately, there are plenty of areas in the house that you can fix that can transform your house’s facade from blah to wow.

Check Your Roof

Do a thorough inspection of your roof. Look for any signs of damage, leaks and corrosion in the metal parts. Pay close attention to the chimney and the vents and check the metal flashing for rust. You also need to check your roofing shingles for debris and mildew growth because they are the prime suspects in roof problems. If you see any signs of deterioration, do the repairs immediately. You can choose to make the adjustments yourself but it will be easier if you let roofers in Nashville, TN to do them for you. This way, you can be sure that the appropriate materials are used and the job is done right.

Take Control of Rainwater Runoff

Aside from keeping your roof free from damage, you also need to keep an eye on your gutters and downspouts. Aside from looking terrible, bent and disconnected gutters and downspouts do not allow for proper water drainage when it rains. The same goes for gutters and downspouts that are filled with holes. For a do-it-yourself approach in repairing gutters and downspouts, you can use silicone caulking to plug up the holes and to repair minor damage. However, you must not forget to check the fascia boards under the gutters because they might need to be replaced as well. For this kind of work, you might need the help of roofers in Nashville, TN to do the job for you.

Make a Path

One of the most overlooked things in the home exterior is the pathway leading to the house. You may not realize it but having a nice-looking path can do wonders for your home exteriors. A pathway that is well-designed can make your home look inviting and cozy. Instead of installing a drab straight concrete pathway, why not opt for a contoured pathway made from brick or natural stone? If you do want to do major remodeling, you can also use a colored concrete resurfacer so you can at least update the color of your concrete walkway.

A Fresh Coat of Paint

An easy way to enhance the look the exteriors of your house is to give it a fresh coat of paint. You can choose to have it painted with the same shade or you can change the color entirely. However, before you start painting, make sure that you repair any damage and the areas are clean and free from debris.


Window Maintenance: Preserving the Quality of Your Windows

Posted on: August 6th, 2012 by Admin

Windows are essential in their function of providing adequate ventilation, lighting, and protection and adding beauty to your house. However, they won’t last forever. They will deteriorate or get damaged over time and that is why, it is important to take care of them and have at least a once-a-year maintenance to prolong their lives and preserve their quality.

Cleaning Your Windows

Cleaning your windows is the most basic task in window maintenance. Use a small paint brush to sweep off the dirt and debris on the window sills. You can also use a vacuum to remove the dirt. Clean the window panes or the glasses by using a squeegee and a scrubber. For the cleaning solution, dishwashing liquid and water will do. Scrub the glasses first with the solution and then wipe them off with a squeegee. Lastly, paint the window frames and sashes if you deem the need to do so.

Detecting Energy Loss

Typically, an average American home has small leaks. Although the effects of these leaks are subtle and may not even seem harmful, believe it or not, they make up almost a third of your total energy loss.

Check the temperature in the different parts of your house. If there is a difference of one or two degrees from the recommended room temperature, this is a sign that you have air leaks. Also, try holding out a piece of tissue paper next to the jambs to check for drafts. If the tissue moves due to wind from outside, there is some problem with your weatherstripping. Moreover, if you notice that your energy bill has been kicking up and there is too much frost buildup and condensation on the window panes, check your weatherstripping and replace the strips if they are already deteriorated. You can also hire a professional to perform an energy audit in your house.

Doing Simple Repairs

One of the common problems in windows, especially in old ones, is that they get stuck. If you encounter this problem, do not ever force to open them. Windows get stuck because the window channels are deteriorated and needs lubrication or paint has gotten in the channels. What you can do is grab a putty knife and slide the blade in the seams to remove the paint. You can also gently tap the handle with a hammer to make it easier.

For some window fixes that are complicated or requires adequate skills and tools, refrain from doing it yourself and hire a professional instead. Professional roofers in Knoxville, TN are also experts in repairing and replacing windows. Search for such roofers in Knoxville, TN by asking for recommendations around your neighborhood.


Common Gutter Problems

Posted on: July 16th, 2012 by Admin

Gutters are important components in a house’s drainage system. They are mainly responsible for channeling water away from the foundation of your house. Critical damages and problems may arise if the flow of rain water is not diverted from and instead comes gushing toward the foundation. Below are some common gutter problems and ideas on how you can fix them.

Clogged Gutters

Gutters get clogged if there are too much debris, leaves, or asphalt shingle granules in them. Since water cannot flow freely, it gets stuck and standing water could cause mosquitoes to proliferate. Too much debris, if not removed, can also become sludge over time and could deteriorate metal gutters.

Make sure that your gutters are always clean by checking them regularly. Remove all the debris and then flush water through it by using a garden hose to see if water is already flowing smoothly. You can also install gutter covers such as mesh screens to prevent debris from clogging the gutters. You can do repairs and cleaning on your own or hire roofers in Nashville if you are not confident to work on a ladder.

Warping Gutters

Deteriorating gutters warp or get distorted over time. Hangers and fasteners would also come loose, causing the gutter to eventually pull away from the edge of the roof. Repair warping gutters by removing the old hangers and fasteners and replacing them with new ones. You may also have to replace some sections of your gutters. However, there are some types of gutters, like the seamless ones, which cannot be replaced by sections. In such case, you would need to hire a roofing expert to do the job.

Leaky Gutters

Holes and loose joints in gutters can cause leaks. This is dangerous as it can wet the foundation and sidings of your house and cause water damage. To find out if you have leaky gutters, run down water through the troughs and observe the areas where water leaks. Caulk or seal holes and joints with gutter sealant to stop the leaks. Make sure to do this during a dry weather so the caulk or sealant can dry completely.

To avoid gutter problems, make sure that you always inspect and clean your gutters regularly. Flushing water through them by using a garden hose is the simplest way to check if there are any problems with your gutters. When cleaning or doing some repairs on your gutters, consider safety especially when climbing a ladder. If you are not confident about working on a ladder, you can ask roofers in Nashville to do the job instead.


The Problem With Ice Dams and How to Stop It

Posted on: June 29th, 2012 by Admin

Ice dams are structures of ice formed by melting snow that froze again along the edges of a roof. They form when a warm attic causes the snow on the roof surface near it to melt, dripping down to the lower part of the roof where it is colder. The melting snow then freezes again, becoming an ice dam. There seems to be no problem with this. However, the process would repeat into a cycle and when it does, the melting snow from the top roof surface and the ice dams will trap water between them. The water would then seep underneath the shingles and then to the roof sheathing and framing, ceiling, and then to walls, causing more problematic roof leaks.

The main problem for the formation of ice dams is the warming of the attic which results from heat loss caused by inadequate insulation. The very good solution to prevent this from happening next winter is to keep your roof cold. How is that going to be possible?

The heat loss from inadequate insulation is because of air leaks. Air leaks could come from chimneys, plumbing pipes, light fixtures, and the like. In preparing your roof for winter and in keeping it cool, go up to your attic before snow storm comes and seal all these openings with caulk or foam.

Ventilators or vents can also help in keeping the roof cold. Install roof vents, ridge vents, and soffit vents before winter comes. Vents allow the cold air to enter and release the air coming from the attic.

If these, and other techniques of keeping the roof cold, did not work, you can instead use an aluminum rake to remove the snow from the upper part of the roof surface to prevent it from melting down and forming ice dams. However, remember not to do this while you are stepping on a ladder.

If you need assistance to some of these fixes, hire one of the best Nashville, TN roofers and have them install more effective insulation and ventilation for you roof. Also, if you are getting a new roof for your home, tell them to make sure that your new roofing system is effective against ice dams and other roof leak problems this time. You can refer to the websites of BBB and NRCA for lists of legitimate and registered Nashville, TN roofers.

Homeowners like you should be on the alert during winter as dealing with roof leaks caused by ice dams is always possible to happen. Moreover, act on the problem right away as roof leaks can lead to more serious water damage and could require you to spend a huge amount of money for repairs.


How to Get Roofing Estimates

Posted on: June 20th, 2012 by Admin

The Better Business Bureau (BBB) advises homeowners to get at least 3 to 4 estimates from various roofing contractors before they hire one. Here are some tips in getting roofing estimates from roofers Nashville, TN.

1. Ask around.

If you are hiring a roofing contractor for the first time, it will not be that easy for you to find the best one. You would need to spend some time doing research and back-tracking on the performance of your prospective contractors. One way to make your search for a good contractor easier is to ask around. Ask your neighbors who have worked with a roofing contractor before for recommendations. Keep a list of your prospective roofers Nashville, TN and start getting estimates from them.

2. Estimates should be written.

It is not enough that a roofing contractor would just discuss the damages on your roof and their recommendations. The findings of a roof inspection and the estimates should be both in writing. An estimate must include the materials needed for the project with their manufacturers, types, quantity and prices, the labor involved, time table for the completion of the project, and the estimated total roofing cost. If the estimate is too high, ask the contractor why is it so and try to negotiate for a lower roofing cost in conformation with your budget. In the same way, if the estimate is too cheap, ask the contractor why their prices are much lower than their competitors. Be skeptical of such offers as these often turn out to be scams.

3. Choose the best roofing company.

After choosing the most cost-efficient roofing estimate for you, make sure that the roofing company you’ll work with is legitimate and reliable. You can ensure the company’s legitimacy by checking out BBB’s database and NRCA’s list of registered contractors. Also, legitimate roofers Nashville, TN are licensed and certified to do roofing jobs in your place. You can request for documents as proofs of their legitimate operation.

4. Know the factors that affect the roofing cost.

There are more than a couple of things that affect the roofing cost. Some of these are the materials, roof pitch, and the labor. The prices of the materials depend on the manufacturer, type, and quantity of materials needed for the project. Sometimes, a roofing estimate gets expensive when the roofing contractor suggests to use more expensive materials from big manufacturers. Meanwhile, the roof pitch refers to the steepness of the roof. The higher the pitch, the higher the cost will be. This is because high-pitched roofs are more difficult to work on than low-sloped and flat roofs. Also, the labor cost for a roofing job may be more expensive if there are more tasks, like tearing off old layers and repairing damages, that need to be accomplished.


 
     
 
 
 
 
 
 
 
 
  Roof Repair   Roof Replacement   Roof Certification   Gutters & Downspouts  
Roof Repair
If you have roof problems like water leakage, algae growth, damaged flashing, missing shingles, we  can provide assistance to you by simply caulking, cleaning...
 
Roof Replacement
Roofs can be greatly damaged by severe weather conditions like hail storm, snow, tornado, and strong winds. Simple repairs will not do to restore the original...
 
Roof Certification
Precision Property Restoration can also certify your roof as water-tight for a certain number of years after we have done our inspection and necessary repairs on...
 
Gutters & Downspouts
Gutters are important in roofing systems. They are necessary for a good drainage system. If you are having problems with your gutter and downspouts, we can...
HOME          SERVICES           INSURANCE CLAIMS          ABOUT US          BLOG          CONTACT US