#1 Rated Contractors! We Serve Nashville and all of Tennessee!
Home Insurance Claims About Us Contact Us

Posts Tagged ‘TN roofing’

Extending Your Roof’s Life Span with Regular Maintenance

Posted on: September 21st, 2012 by Admin

Roofs have long life spans, but this should not let homeowners be lax about the durability of their roofs. If roofs are not maintained properly or given adequate care, they will deteriorate quickly or have problems more frequently. To keep a healthy roof and extend its life, care for it intentionally with regular maintenance.

Gutters and Downspouts

Gutters and downspouts work hand-in-hand in maintaining a good drainage system for your roof and home. However, they also deteriorate or get damaged. At least twice a month, check up on your gutter and clear it off from leaves and other debris which can cause clogging. During winter, don’t let the snow sit on the gutters for too long as it can cause it to sag. Make sure that the water flows freely along the gutters and into the downspout. Meanwhile, make sure that the downspout is always in correct alignment with the gutter. The downspout’s end should never be near your house’s foundation to avoid a wet basement and cracked foundation.

Attic Ventilation

Too much heat and cold can cause damages to your roof system. Moisture can get trapped in the attic and may cause roof frames, especially those made of wood, to rot. A warm attic can always start the process of ice dam formation. To ensure a well-regulated flow of air in your home, use exhaust and intake vents in balance. In this way, the temperature in your attic will neither be too hot nor too cold. Moreover, it also makes the living space more comfortable. If you don’t think you have the right types of vents in your home, consult with a Nashville, TN roofing contractor.

Regular Roof Inspection

Roof inspection must be done at least once a month or as needed especially after a storm or hail. Check if there are missing shingles, damaged flashings, protruding shingle nails, and mold growths. Examine also the quality of your shingles. Asphalt shingles, for example, lose too much granules or curl when they are already near the end of their life span. In such case, you may need to replace them already. Damaged flashings and nail holes allow water to seep through the roof surface, causing leaks. To prevent this, caulk tiny openings and seal holes. And don’t take molds for granted because they can accelerate the deterioration of your roof. If you are not confident about working at the top of your roof or even climbing a ladder, you can ask a Nashville, TN roofing contractor to help you perform regular roof inspection.

Out With the Old Paint, In With a Fresh Coat

Posted on: September 12th, 2012 by Admin

If you have just moved in, for instance, and the house has been in the neighborhood since the 70’s, you might want to take a look at its exterior paint. It might still look good at first glance but most of the time, it is already deteriorated and repainting is needed. In such cases, stripping the cladding bare is necessary before a fresh coat of paint is applied.

There are more than a couple of ways to remove the old paint from a house’s exterior: grinding, burning, and using chemicals. Grinding is the process of removing the old paint using a power sander disk or a clapboard sander. With the help of such tools, stripping the old paint is easy and fast. However, this method often works best in clapboard sidings and may occasionally scar wood surfaces if not used carefully.

The other method, burning, involves using heat to remove the old paint. Like grinding, it is also a fast and inexpensive way of stripping old paint. However, there is risk of fire especially when an ember is left under a clapboard. Thus, be very cautious when employing this method. However, a tool called infrared heat allows for a safer method of removing old paint. It works faster than other burning methods but it is not that widely available.

Lastly, using chemicals to strip the old paint is more expensive than the previous methods already described. Most TN roofing contractors would also agree that there is too much hassle employing this method, considering that some do not work. Methylene chloride is the most powerful chemical and peels off old paint quickly. However, you need to put on some protective wear for safety.

The New Color

Picking the new color for your house can be tricky. Most homeowners get indecisive at this point. To get some ideas on how you want your new home to look like, check out home improvement or lifestyle magazines and websites. Experiment also on various colors and shades to come up with the perfect color scheme that you want.

If you already have colors in your shortlist, buy small sample cans and paint the colors on different parts of your house. As you consider the lighting, see how they look on your house. You can do this test with your TN roofing or paint contractor so that he can also give some suggestions on what type of paint you should buy, how many gallons, and the right colors to pick.

Before you start applying a fresh coat of paint on your house’s exterior, make sure that the siding surfaces are clean, patched up or repaired, smooth, and dry. Otherwise, your paint job will not be successful or the paint will not last for long. Make sure also that the weather is perfect for a house painting job.

Planning a House Paint Job Like a Pro

Posted on: September 7th, 2012 by Admin

If you are thinking about repainting your home, you need at least more than a month to start making plans. Planning a house painting job early is wise because by doing so, you have more time to choose colors, learn various painting techniques, buy equipment that you need, and accomplish a well-done prep work. Here are some tips on how to do carefully plan a house paint job:

Understanding Colors

Choosing paint colors is where homeowners get indecisive most of the time. To avoid this dilemma on having to spend so much time picking the colors you want for your house, start studying the color wheel. The color wheel features primary and secondary colors. Primary colors are blue, red, and yellow. Blends of these three colors are called secondary colors namely, orange, violet, and green. Meanwhile, analogous colors are those that are positioned side-by-side in the color wheel. Contemporary colors sit opposite each other which, when combined, produces a striking effect. When you already understand these basics, you can start playing with various combinations of colors and create your own color schemes.

Considering Your Preferences

Colors are great instruments of expressions and you cannot successfully create color schemes without considering what you want. Do you want warm colors for your room? Do you think neutral colors will look good in your living room? Are you cool with black? Answering such questions will help you come up with your final plan on how you want your rooms to look like. Stylists say that in most cases, homeowners painting their home their way achieves an impressive result without having to study much about color selection. You can also read about the psychology of colors to understand what each color says about you and your home.

Documenting Light

Light greatly affects how a paint color would look like in your rooms. Documenting light directions in your room can help you decide what color should you paint a room with. Buy small sample paint cans of the paint colors you like and paint them on a wall in a room. You can take photographs of how the paint color looks like in the absence of light and when it is hit by sunlight.

Working the Prep Work

Do the prep work at least 2 days before the actual painting job. This will allow you to do everything that needs to be done without being in a hurry and missing out on some details. If you are having a Tennessee roofing contractor come over to do the job for you, finish the prep work before they come. And just a piece of advice: Make sure to hire only a legitimate Tennessee roofing contractor.

Common Wood Window Problems and Solutions

Posted on: September 5th, 2012 by Admin

Wood is one of the most affordable materials for windows. However, they are susceptible to rot and insect damage and may deteriorate more quickly than other window materials. Wood windows also need more frequent repainting. If you have wood windows, you may have already been experiencing problems with them. Here are some of the common problems on wood windows and some quick tips on restoring them.


Weatherstripping is a strip of material used to seal the windows to prevent air leaks. It plays a vital role as it keeps windows insulated and airtight. However, weatherstripping gets deteriorated and when it does, it will make your windows drafty and allow moisture to get trapped. When you replace old weatherstripping, choose a better material and avoid felt weatherstrips as they absorb water.

Foggy Glass

Dual pane windows are likely to trap moisture and cause the glasses to fog. These windows are composed of 2 sheets of glasses and an air locked in between them. If a seal is broken, moisture will come in between the panes and cause the glass to fog. Cleaning foggy single pane windows with a soapy solution and a squeegee is easy. However, you may have a hard time getting rid of that fog in your dual pane windows. Ask help from your Nashville, TN roofing contractor. In most cases, foggy dual pane windows need to be replaced.


Molds grow in damp and poorly lit areas. You would know that your windows have molds when you notice black spots or any form of discoloration on the window sills and frames. Although they may not seem to cause any damage, molds produce mold spores which can be dangerous to health. If your wood windows have molds, use a vacuum cleaner to suck out the mold spores and dispose the bag to the trash outside. Clean the moldy areas with a soapy solution.

Inoperable Windows

This is a common problem not just in wood windows but in other window materials that need repainting. The main reason for the inoperability of windows is the dry paint that must have affected the window channels, causing the window to shut permanently. To avoid this from happening, be careful not to paint the jamb, sash cord, pulley, and the sides of sash when repainting your windows.

Meanwhile, wood damages like rot, gouges, deep scratches, and the like may not be fixed by simple repairs anymore. In such cases, ask your Nashville, TN roofing contractor for help. You may also consider installing new windows.

3 Ways of Storm-Proofing Your Windows

Posted on: September 3rd, 2012 by Admin

Your windows are one of the weakest and most storm-vulnerable parts of your house. Window panes can be shattered by flying debris and high winds. Having your badly damaged windows repaired or replaced after a storm can be too expensive. You can prevent these things from happening by storm-proofing your windows.

Duct Tape

Some homeowners who do not have enough time to install storm shutters or impact-resistant windows resort to using a duct or hurricane tape to somehow protect their windows. However, this storm proofing solution only provides temporary protection and may not resist extreme storm conditions. Homeowners often have the wrong notion that duct taping their windows make the windows shatter-proof and protected. The truth is, duct tapes can never be reliable when it comes to storm-proofing your windows.

Storm Shutters

Storm shutters, also referred to as hurricane coverings, are used to cover windows during a storm. It protects the windows from flying debris, preventing them to get shattered. Storm shutters come in varieties: accordion, colonial, roll-down, plywood, awning, storm panel, and bahama.

Although they do not usually meet building codes and are the least durable, plywood storm shutters are the most commonly used material by homeowners to storm-proof their homes, because they are also the cheapest of all the materials.

Impact-Resistant Windows

Impact-resistant windows may not be that appealing to most homeowners as they are more expensive—almost double the price of regular windows. However, installing impact-resistant windows is the best way to storm-proof your windows. They are specially designed to withstand large debris and Category 5 wind conditions. (According to the Saffir-Simpson Hurricane Scale, storms with winds exceeding 156 mph are classified under Category 5.)

Impact-resistant windows are composed of laminated glass and layers of polyvinyl butyral (PVB). Unlike duct tape and some types of storm shutters, impact-resistant windows are permanent protection for your windows. They may be damaged by a strong impact but unlike regular windows, they will not be shattered.

Other ways to protect your windows from storm damage is ensuring that your trees and bushes are well-trimmed before a storm hits. Check also the weatherstripping of your windows. If the weatherstripping is deteriorated, they will not function well in preventing water to seep and making the windows airtight.

If you are just building your new home or having your windows replaced, invest in long-term protection for your windows. Ask your roofing Clarksville, TN contractor for some advice on the best window material you should buy. Make sure as well that your roofing Clarksville, TN contractor complies with the building codes in your state.

How Can an Attic Ventilation System Fail

Posted on: August 31st, 2012 by Admin

Attic ventilation is responsible for the proper air flow in the living space of your house. If your attic ventilation system is not effective, you and your family will experience too much heat in the summer and too much cold in the winter. Regulating extreme temperatures is one of the most important functions of an effective attic ventilation system. The following are some reasons why your attic ventilation could fail.

Taking Ice Buildup for Granted

It is true that the attic reaches soaring temperatures during the summer, and this is the time that an attic ventilation system could work perfectly. However, do not be so focused on the summer months when designing your attic ventilation system.

In a cold weather, the greatest culprit for damages and rot in your roofing system is moisture. It is during this time that household members generate more water vapor than in summer. As you do household activities like cooking and bathing, water vapor rises to your attic and, when trapped, could cause rot and mold growth. Your attic ventilation is poor in winter when you notice too much condensation on your windows and recurrent mold growth on your walls and attic.

Ignoring Attic Bypasses

Attic bypasses are opening or gaps through which air can leak. If they are not sealed or insulated, they can cause excessive condensation in the attic and heat loss to the roof deck. The latter can further cause ice dams to form as the warm part of the attic will cause the snow to melt. Find attic bypasses in your attic and make sure they are sealed or insulated to prevent air from leaking unnecessarily. Common attic bypasses include plumbing vents, electrical boxes, lighting fixtures, and the attic hatch.

Too Much Exhaust Vents

Some homeowner have the notion that having more vents is better. However, you may not realize that if you use different types of exhaust vents on the same roof surface, the ventilation system will actually malfunction. To know how much roof vents should you have and the most appropriate types you should use for your house, consult a TN roofing expert.

Wrong Combination of Intake and Exhaust Vents

Intake and exhaust vents must work in perfect collaboration all the time. Otherwise, your attic ventilation system will never be effective; it will instead be the cause of excessive condensation in your attic, ice dams, energy loss, and other roofing problems. Keep in mind that intake vents—responsible for allowing fresh air to come in—and exhaust vents—flush warm air out of the house—always work hand in hand. Ask your TN roofing contractor about the right combination of intake and exhaust vents that should be installed in your house to ensure effective attic ventilation.

How to Achieve a Phenomenal House Painting Disaster

Posted on: August 3rd, 2012 by Admin

Many homeowners think that painting your own house is easy or can be learned overnight. What they don’t realize is that the house painting job needs a lot of preparation, having good painting skills, and the use of right tools to achieve an excellent paint job. Here’s how others achieved a different thing for their homes—a disastrous house painting job.

1. Pick the wrong color.

This is one of the most common problems faced by homeowners, whether or not they are painting their house on their own or having a professional do it. Some homeowners are just indecisive about what color scheme to use. Sadly, some of them did not arrive at a good decision until it is too late and ended up ruining their curb appeal or house interior paint.

Choosing colors from the color wheel or fan from the paint store is not enough. Buy small sample cans (It is better to spend on these now than on several gallons of paint to cover your numerous paint mistakes.) instead and try the colors out on small portions of your walls. See how the colors look when the light is out and when there is sunlight and which sets the mood that you want. Understand also the psychology of colors such as red stimulates appetite; blue calms and tranquilizes; green is the color of nature; and yellow is the color of delight. You can also flip some pages of home magazines or browse websites for ideas.

2. Paint right away to save time. Prep work is not necessary.

This is a lie. Prep work is important and that is why it usually takes more than a day to do. Preparation includes cleaning the surfaces that will be painted, removing old paint, gathering furniture into the center of the room, covering wall and ceiling fixtures, covering the floor with drop cloth, cutting in, caulking cracks and holes, doing minor repairs, and more. If you are doing exterior painting and your sidings are badly damaged, have them replaced already instead of repainting them.

3. Do it yourself.

There’s nothing wrong with painting your house yourself especially if you really know how. But for many homeowners who are not confident about doing it or haven’t even tried laying a paint brush on their walls, it is better that they hire a professional. Some roofing Nashville, TN companies do not only offer roofing services but they can also paint your home. Make sure that the roofing Nashville, TN that you will hire has already an experience in house painting jobs. In addition, doing it yourself could only lead to repetitive mistakes and could cost you even more money and energy.

How to Fail on Wood Siding Painting

Posted on: August 2nd, 2012 by Admin

House painting can be fun but it doesn’t necessarily mean that it’s easy to do. The difficulty of the job depends on the surface material that you will be painting on. Sidings made of wood are the ones that need frequent repainting the most compared with other siding materials. However, many homeowners fail in painting their wood sidings and wonder why the paint seems not to last. The fact is many homeowners overlook a lot of details when they do house painting jobs. If you want to be successful in your endeavor, avoid the following mistakes.

1. Painting on wet wood.

This is an important point to remember. Wood absorb moisture and when it gets saturated, it is not just the perfect surface to paint on. Many homeowners do not realize this but painting on wet wood is a futile effort. The paint would get easily deteriorated and not last for long. Thus, consider the weather when painting your house and paint only in a bright sunny weather when the wind is not blowing strong and when there is no rain or snow. Make sure that the surface is completely dry before applying paint on it.

2. Painting on dirty wood siding.

You can’t just paint on a surface right away. Clean the surface first before applying paint. Power wash it to remove the dirt and the loose paint. Scrape off old paint and stubborn dirt. Sand to smooth the surface before applying the new paint. If you want the paint to last, make sure you apply it on a clean surface.

3. Painting on mildew.

If you notice that there is some mildew or mold growth on your wood sidings, you can’t just patch them up and hide them with a new paint. Get rid of them instead. Mildew and mold are fungi that grow in damp areas or places where there is moisture. If they are not removed, they would not only give your house an ugly look but would also cause the wood to rot eventually.

4. Painting below the recommended minimum temperature.

Do you read the labels on your cans of paint before opening them? It must be indicated there the minimum temperature at which a certain type of paint must be painted. For example, latex paint should only be used when the temperature is at least 50°F while 40°F for oil-based paint.

In summary, observe proper preparation and conditions before painting your wood sidings to make the paint last. Always prepare the wood surface before applying a new paint. If your wood sidings are rotten or there are large cracks already, it is better to replace than to repaint them. Seek advice from a roofing company Nashville, TN if you are replacing your sidings. A roofing company Nashville, TN can guide you into choosing the most appropriate material that’s right for your house and budget.

How to Deal With Common Contractor Problem

Posted on: July 31st, 2012 by Admin

You cannot expect to always have a smooth working relationship with a roofing Clarksville, TN contractor. Sometimes, problems arise and if you experience one, you should know how to handle the situation. Here are some of the common problems you might encounter with a contractor and how to deal with them:

Additional Costs Due to Unanticipated Conditions

Unanticipated conditions refer to rot, termite, damages, and the like which were not observed by the contractor before starting with the project and which are also the reasons why he would ask the homeowner to pay for extra work. The truth is, the homeowner is never to blame for such negligence and he is not supposed to pay for the extra expenses. If you encounter this problem, try to talk to the contractor about it or you can just call off the project.


It is important that a roofing Clarksville, TN contractor keeps his promise of starting and getting the job done right on time. However, if you experience delays in construction, you should bring the problem to the contractor’s attention. Ask for a clear explanation about the causes of delay. To avoid this problem, always ask contractors to create a schedule of all the tasks that they need to do and the time and date when they can start and finish each task.

Shocking Alterations in the Plan

There are some contractors, architects, or designers that would do away with some parts of the plan and proceed on doing what they believe is better. This may not be a problem at all for some homeowners but it is the opposite to those who might not like the changes. To avoid this problem, gather the team before the project is started and tell them to just stick with the plan.

What to Do

First, hire the best roofing Clarksville, TN contractor you could possibly find. Ask for recommendations, search online, check out lists of licensed contractors, and get at least 3 bids (as the Better Business Bureau suggests). Interview your prospect contractors about their experience and track record. Make sure to hire a legitimate contractor.

Second, establish good communication between you and the contractor by meeting with the core people of the team regularly, especially when planning the project. Make sure that all agreements are well understood.

Lastly, read the contract thoroughly before signing it. A well-written contract must have complete contact information of the contractor, payment schedule, materials and labor involved in the project, building permits, contractor’s licensing and insurance, and warranties from the manufacturers and the contractor.

Attic Ventilation for Homeowners: Why is it Important?

Posted on: July 27th, 2012 by Admin

Attic ventilation adds comfort to your home and helps you save on energy costs. But most importantly, it regulates the air movement in your house. How?

During hot weather like summer, the heat coming from the sun directly hits your roof, making the attic extremely hot. This heat travels to the attic floor and then to the lower rooms. Attic ventilation makes your house cooler in such weather as it prevents heat build up. Moreover, you will also be able to save on air conditioning costs.

During cold weather like winter, attic ventilation prevents moisture build up. Remember the basic physics: hot air rises while cool air descends. However, in a cold weather, hot air rises with moist and travels to the attic. If you don’t have adequate ventilation, that hot, moist air gets trapped in the attic causing trusses and rafters to rot and can even ruin the roof insulation. Aside from the natural hot air that rises, some home activities such as cooking, bathing, and laundry also produces water vapor.

Attic ventilation also prevents the formation of ice dams. Ice dams are formed when a warm attic, which is caused by hot air traveling upward the attic, melts the snow on top of the roof. Since the lower part of the roof remains cool, the melting snow freezes again on the edge of the roof, forming ice dams. As the process repeats, water gets stuck in between the ice dams and the melting snow and seeps underneath the shingles, causing leaks.

Attic Ventilation: Getting it Right

Attic ventilation must be balanced by installing adequate and appropriate intake and exhaust vents. Intake vents like the soffit vents allow fresh, dry, cooler air from outside the house to enter the attic, while exhaust vents release hot air. Most roofing experts deem ridge vents as the most cost-effective and most efficient exhaust vent because they don’t need power to operate and they can vent the entire sheathing as long as they are installed at sufficient length.

However, if you’re thinking that installing several vents on your roof is good to release as much hot air from your house, you are wrong. If you have too many exhaust vents installed—for example, a ridge vent and more than a couple of powered fans—they can get the intake from each other, which is air with rain, snow, or dirt, instead of getting it from the soffit vents.

A Nashville, TN roofing contractor can help you choose and install effective attic ventilation system for your home. The Nashville, TN roofing contractor that you’ll be working with must have an experience installing vents in your region. This is because of the possibility that what works best in other regions might not be the same as effective in your region.

  Roof Repair   Roof Replacement   Roof Certification   Gutters & Downspouts  
Roof Repair
If you have roof problems like water leakage, algae growth, damaged flashing, missing shingles, we  can provide assistance to you by simply caulking, cleaning...
Roof Replacement
Roofs can be greatly damaged by severe weather conditions like hail storm, snow, tornado, and strong winds. Simple repairs will not do to restore the original...
Roof Certification
Precision Property Restoration can also certify your roof as water-tight for a certain number of years after we have done our inspection and necessary repairs on...
Gutters & Downspouts
Gutters are important in roofing systems. They are necessary for a good drainage system. If you are having problems with your gutter and downspouts, we can...
HOME          SERVICES           INSURANCE CLAIMS          ABOUT US          BLOG          CONTACT US